Contract 0xf0a26d021b2a57afeaed3226ea5dc0fceb07b8cb

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

import "@openzeppelin/contracts-upgradeable/access/AccessControlEnumerableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./interfaces/IFixedRateMarket.sol";
import "./interfaces/IQollateralManager.sol";
import "./interfaces/IFeeEmissionsQontroller.sol";
import "./interfaces/IStakingEmissionsQontroller.sol";
import "./interfaces/ITradingEmissionsQontroller.sol";
import "./interfaces/IQAdmin.sol";
import "./interfaces/IVeQoda.sol";
import "./libraries/QTypes.sol";

contract QAdmin is Initializable, AccessControlEnumerableUpgradeable, IQAdmin {
  
  /// @notice Identifier of the admin role
  bytes32 public constant ADMIN_ROLE = keccak256("ADMIN");

  /// @notice Identifier of the market role
  bytes32 public constant MARKET_ROLE = keccak256("MARKET");

  /// @notice Identifier of the role who allows accounts to mint tokens in QodaERC20
  bytes32 public constant MINTER_ROLE = keccak256("MINTER");

  /// @notice Identifier of the veToken role to do stake / unstake in StakingEmissionsQontroller
  bytes32 public constant VETOKEN_ROLE = keccak256("VETOKEN");

  /// @notice Contract for managing user collateral
  IQollateralManager private _qollateralManager;  

  /// @notice Contract for staking rewards
  IStakingEmissionsQontroller private _stakingEmissionsQontroller;

  /// @notice Contract for trading volume rewards
  ITradingEmissionsQontroller private _tradingEmissionsQontroller;

  /// @notice Contract for handling protocol fee charging and emission
  IFeeEmissionsQontroller private _feeEmissionsQontroller;

  /// @notice Contract for veQoda Token
  IVeQoda private _veQoda;

  /// @notice Iterable list of all `Asset` addresses
  address[] private _allAssets;
  
  /// @notice Default value for `minCollateralRatio` if it is not defined in `_creditFacilityMap` for given address
  /// Scaled by 1e8
  uint private _minCollateralRatio;

  /// @notice Default value for `initCollateralRatio` if it is not defined in `_creditFacilityMap` for given address
  /// Scaled by 1e8
  uint private _initCollateralRatio;

  /// @notice The percent, ranging from 0% to 100%, of a liquidatable account's
  /// borrow that can be repaid in a single liquidate transaction.
  /// Scaled by 1e8
  uint private _closeFactor;

  /// @notice Grace period (in seconds) after maturity before liquidators are allowed to
  /// liquidate underwater accounts.
  uint private _repaymentGracePeriod;
  
  /// @notice Grace period (in seconds) after maturity before lenders are allowed to
  /// redeem their qTokens for underlying tokens
  uint private _maturityGracePeriod;
  
  /// @notice Additional collateral given to liquidator as incentive to liquidate
  /// underwater accounts. For example, if liquidation incentive is 1.1, liquidator
  /// receives extra 10% of borrowers' collateral
  /// Scaled by 1e8
  uint private _liquidationIncentive;
  
  /// @notice threshold in USD where protocol fee from each market will be transferred into `FeeEmissionsQontroller`
  /// once this amount is reached, scaled by 1e6
  uint private _thresholdUSD;

  /// @notice Mapping for the annualized fee for loans in basis points for each `FixedRateMarket`.
  /// The fee is charged to both the lender and the borrower on any given deal. The fee rate will
  /// need to be scaled for loans that mature outside of 1 year.
  /// Scaled by 1e4
  mapping(IFixedRateMarket => uint) private _protocolFee;

  /// @notice All enabled `Asset`s
  /// tokenAddress => Asset
  mapping(IERC20 => QTypes.Asset) private _assets;

  /// @notice Get the `FixedRateMarket` contract address for any given
  /// token and maturity time
  /// tokenAddress => maturity => fixedRateMarket
  mapping(IERC20 => mapping(uint => IFixedRateMarket)) private _fixedRateMarkets;

  /// @notice Mapping for the MToken market corresponding to any underlying ERC20
  /// tokenAddress => mTokenAddress
  mapping(IERC20 => address) private _underlyingToMToken;
  
  /// @notice Mapping to determine whether a `FixedRateMarket` address
  /// is enabled or not
  /// fixedRateMarket => bool
  mapping(IFixedRateMarket => bool) private _enabledMarkets;

  /// @notice Mapping to determine the minimum quote size for any `FixedRateMarket`
  /// in PV terms, denominated in local currency
  /// fixedRateMarket => minQuoteSize
  mapping(IFixedRateMarket => uint) private _minQuoteSize;
  
  /// @notice Mapping to determine collateral ratio and credit limit of each address
  /// userAddress => creditInfo
  mapping(address => QTypes.CreditFacility) private _creditFacilityMap;

  /// @notice Constructor for upgradeable contracts
  function initialize(address admin) public initializer {

    // Initialize access control
    __AccessControlEnumerable_init();
    _setupRole(ADMIN_ROLE, admin);
    _setupRole(MARKET_ROLE, admin);
    _setupRole(MINTER_ROLE, admin);
    _setupRole(VETOKEN_ROLE, admin);
    _setRoleAdmin(ADMIN_ROLE, ADMIN_ROLE);
    _setRoleAdmin(MARKET_ROLE, ADMIN_ROLE);
    _setRoleAdmin(MINTER_ROLE, ADMIN_ROLE);
    _setRoleAdmin(VETOKEN_ROLE, ADMIN_ROLE);
    
    // Set initial values for parameters
    _minCollateralRatio = 1e8;
    _initCollateralRatio = 1.1e8;
    _closeFactor = 0.5e8;
    _repaymentGracePeriod = 14400;
    _maturityGracePeriod = 28800;
    _liquidationIncentive = 1.1e8;
  }

  modifier onlyAdmin() {
    require(hasRole(ADMIN_ROLE, msg.sender), "QAdmin: only admin");
    _;
  }

  modifier onlyMarket() {
    require(hasRole(MARKET_ROLE, msg.sender), "QAdmin: only market");
    _;
  }

  modifier onlyVeToken() {
    require(hasRole(VETOKEN_ROLE, msg.sender), "QAdmin: only veToken");
    _;
  }

  /** ADMIN FUNCTIONS **/

  /// @notice Call upon initialization after deploying `QollateralManager` contract
  /// @param qollateralManagerAddress Address of `QollateralManager` deployment
  function _setQollateralManager(address qollateralManagerAddress) external onlyAdmin {
    
    // Initialize the value
    _qollateralManager = IQollateralManager(qollateralManagerAddress);

    // Emit the event
    emit SetQollateralManager(qollateralManagerAddress);
  }

  /// @notice Call upon initialization after deploying `StakingEmissionsQontroller` contract
  /// @param stakingEmissionsQontrollerAddress Address of `StakingEmissionsQontroller` deployment
  function _setStakingEmissionsQontroller(address stakingEmissionsQontrollerAddress) external onlyAdmin {

    // Initialize the value
    _stakingEmissionsQontroller = IStakingEmissionsQontroller(stakingEmissionsQontrollerAddress);

    // Emit the event
    emit SetStakingEmissionsQontroller(stakingEmissionsQontrollerAddress);
  }

  /// @notice Call upon initialization after deploying `TradingEmissionsQontroller` contract
  /// @param tradingEmissionsQontrollerAddress Address of `TradingEmissionsQontroller` deployment
  function _setTradingEmissionsQontroller(address tradingEmissionsQontrollerAddress) external onlyAdmin {
    
    // Initialize the value
    _tradingEmissionsQontroller = ITradingEmissionsQontroller(tradingEmissionsQontrollerAddress);

    // Emit the event
    emit SetTradingEmissionsQontroller(tradingEmissionsQontrollerAddress);
  }

  /// @notice Call upon initialization after deploying `FeeEmissionsQontroller` contract
  /// @param feeEmissionsQontrollerAddress Address of `FeeEmissionsQontroller` deployment
  function _setFeeEmissionsQontroller(address feeEmissionsQontrollerAddress) external onlyAdmin {
    _feeEmissionsQontroller = IFeeEmissionsQontroller(feeEmissionsQontrollerAddress);

    // Emit the event
    emit SetFeeEmissionsQontroller(feeEmissionsQontrollerAddress);
  }

  /// @notice Call upon initialization after deploying `veQoda` contract
  /// @param veQodaAddress Address of `veQoda` deployment
  function _setVeQoda(address veQodaAddress) external onlyAdmin {

    // Initialize the value
    _veQoda = IVeQoda(veQodaAddress);

    // Give `veQoda` the VETOKEN access control role
    _setupRole(VETOKEN_ROLE, veQodaAddress);

    // Emit the event
    emit SetVeQoda(veQodaAddress);
  }
  
  /// @notice Admin function for adding new Assets. An Asset must be added before it
  /// can be used as collateral or borrowed. Note: We can create functionality for
  /// allowing borrows of a token but not using it as collateral by setting
  /// `collateralFactor` to zero.
  /// @param token ERC20 token corresponding to the Asset
  /// @param isYieldBearing True if token bears interest (eg aToken, cToken, mToken, etc)
  /// @param underlying Address of the underlying token
  /// @param oracleFeed Chainlink price feed address
  /// @param collateralFactor_ 0.0 to 1.0 (scaled to 1e8) for discounting risky assets
  /// @param marketFactor_ 0.0 to 1.0 (scaled to 1e8) for premium on risky borrows
  function _addAsset(
                     IERC20 token,
                     bool isYieldBearing,
                     address underlying,
                     address oracleFeed,
                     uint collateralFactor_,
                     uint marketFactor_
                     ) external onlyAdmin {

    // Cannot add the same asset twice
    require(!_assets[token].isEnabled, "QAdmin: asset already exists");

    // `collateralFactor` must be between 0 and 1 (scaled to 1e8)
    require(
            collateralFactor_ <= MAX_COLLATERAL_FACTOR(),
            "QAdmin: invalid collateral factor"
            );

    // `marketFactor` must be between 0 and 1 (scaled to 1e8)
    require(
            marketFactor_ <= MAX_MARKET_FACTOR(),
            "QAdmin: invalid market factor"
            );

    // Initialize the `Asset` with the given parameters, and no enabled
    // maturities to begin with
    uint[] memory maturities_;
    QTypes.Asset memory asset = QTypes.Asset(
                                             true,
                                             isYieldBearing,
                                             underlying,
                                             oracleFeed,
                                             collateralFactor_,
                                             marketFactor_,
                                             maturities_
                                             );
    _assets[token] = asset;
    _allAssets.push(address(token));
    
    // Add yield-bearing assets to the (underlying => MToken) mapping
    if(isYieldBearing) {
      _underlyingToMToken[IERC20(underlying)]= address(token);
    }
    
    // Emit the event
    emit AddAsset(address(token), isYieldBearing, oracleFeed, collateralFactor_, marketFactor_);
  }

  /// @notice Adds a new `FixedRateMarket` contract into the internal mapping of
  /// whitelisted market addresses
  /// @param market New `FixedRateMarket` contract address
  /// @param protocolFee_ Corresponding protocol fee in basis points
  /// @param minQuoteSize_ Size in PV terms, local currency
  function _addFixedRateMarket(
                               IFixedRateMarket market,
                               uint protocolFee_,
                               uint minQuoteSize_
                               ) external onlyAdmin {
    
    // Get athe values from the corresponding `FixedRateMarket` contract
    uint maturity = market.maturity();
    IERC20 token = market.underlyingToken();

    // Don't allow zero address
    require(address(token) != address(0), "QAdmin: invalid token address");

    // Only allow `Markets` where the corresponding `Asset` is enabled
    require(_assets[token].isEnabled, "QAdmin: unsupported asset");

    // Check that this market hasn't already been instantiated before
    require(
            address(_fixedRateMarkets[token][maturity]) == address(0),
            "QAdmin: market already exists"
            );

    // Add the maturity as enabled to the corresponding Asset
    QTypes.Asset storage asset = _assets[token];
    asset.maturities.push(maturity);
    
    // Add newly-created `FixedRateMarket` to the lookup list
    _fixedRateMarkets[token][maturity] = market;

    // Enable newly-created `FixedRateMarket`
    _enabledMarkets[market] = true;

    // Give `FixedRateMarket` the MARKET access control role
    _setupRole(MARKET_ROLE, address(market));
    
    // Emit the event
    emit CreateFixedRateMarket(
                               address(market),
                               address(token),
                               maturity
                               );

    // Initialize the protocol fee for this `market`
    _setProtocolFee(market, protocolFee_);

    // Initialize the minimum `Quote` size for this `market`
    _setMinQuoteSize(market, minQuoteSize_);
  }
  
  /// @notice Update the `collateralFactor` for a given `Asset`
  /// @param token ERC20 token corresponding to the Asset
  /// @param collateralFactor_ 0.0 to 1.0 (scaled to 1e8) for discounting risky assets
  function _setCollateralFactor(
                                IERC20 token,
                                uint collateralFactor_
                                ) external onlyAdmin {

    // Asset must already be enabled
    require(_assets[token].isEnabled, "QAdmin: asset not enabled");

    // `collateralFactor` must be between 0 and 1 (scaled to 1e8)
    require(
            collateralFactor_ <= MAX_COLLATERAL_FACTOR(),
            "QAdmin: invalid collateral factor"
            );

    // Look up the corresponding asset
    QTypes.Asset storage asset = _assets[token];

    // Emit the event
    emit SetCollateralFactor(address(token), asset.collateralFactor, collateralFactor_);

    // Set `collateralFactor`
    asset.collateralFactor = collateralFactor_;
  }

  /// @notice Update the `marketFactor` for a given `Asset`
  /// @param token Address of the token corresponding to the Asset
  /// @param marketFactor_ 0.0 to 1.0 (scaled to 1e8) for discounting risky assets
  function _setMarketFactor(
                            IERC20 token,
                            uint marketFactor_
                            ) external onlyAdmin {

    // Asset must already be enabled
    require(_assets[token].isEnabled, "QAdmin: asset not enabled");

    // `marketFactor` must be between 0 and 1 (scaled to 1e8)
    require(
            marketFactor_ <= MAX_MARKET_FACTOR(),
            "QAdmin: invalid asset factor"
            );

    // Look up the corresponding asset
    QTypes.Asset storage asset = _assets[token];

    // Emit the event
    emit SetMarketFactor(address(token), asset.marketFactor, marketFactor_);
    
    // Set `marketFactor`
    asset.marketFactor = marketFactor_;
  }

  /// @notice Set the minimum quote size for a particular `FixedRateMarket`
  /// @param market Address of the `FixedRateMarket` contract
  /// @param minQuoteSize_ Size in PV terms, local currency
  function _setMinQuoteSize(IFixedRateMarket market, uint minQuoteSize_) public onlyAdmin {

    // `FixedRateMarket` must already exist
    require(
            address(_fixedRateMarkets[market.underlyingToken()][market.maturity()]) != address(0),
            "QAdmin: market doesn't exist"
            );

    // Emit the event
    emit SetMinQuoteSize(address(market), _minQuoteSize[market], minQuoteSize_);

    // Set `minQuoteSize`
    _minQuoteSize[market] = minQuoteSize_;
  }
  
  /// @notice Set the global minimum and initial collateral ratio
  /// @param minCollateralRatio_ New global minimum collateral ratio value
  /// @param initCollateralRatio_ New global initial collateral ratio value
  function _setCollateralRatio(uint minCollateralRatio_, uint initCollateralRatio_) external onlyAdmin {
    // `minCollateralRatio_` cannot be above `initCollateralRatio_` 
    require(
            minCollateralRatio_ <= initCollateralRatio_,
            "QAdmin: min collateral ratio must be less than or equal to init collateral ratio"
            );

    // Emit the event
    emit SetCollateralRatio(_minCollateralRatio, _initCollateralRatio, minCollateralRatio_, initCollateralRatio_);
    
    // Set `_minCollateralRatio` to new value
    _minCollateralRatio = minCollateralRatio_;
    
    // Set `_initCollateralRatio` to new value
    _initCollateralRatio = initCollateralRatio_;
  }
  
  /// @notice Set credit facility for specified account
  /// @param account_ account for credit facility adjustment
  /// @param enabled_ If credit facility should be enabled 
  /// @param minCollateralRatio_ New minimum collateral ratio value
  /// @param initCollateralRatio_ New initial collateral ratio value
  /// @param creditLimit_ new credit limit in USD, scaled by 1e18
  function _setCreditFacility(address account_, bool enabled_, uint minCollateralRatio_, uint initCollateralRatio_, uint creditLimit_) external onlyAdmin {
    // `minCollateralRatio_` cannot be above `initCollateralRatio_` 
    require(
            minCollateralRatio_ <= initCollateralRatio_,
            "QAdmin: min collateral ratio must be less than or equal to init collateral ratio"
            );
    // Emit the event
    emit SetCreditFacility(
      account_, 
      _creditFacilityMap[account_].enabled,
      _creditFacilityMap[account_].minCollateralRatio, 
      _creditFacilityMap[account_].initCollateralRatio,
      _creditFacilityMap[account_].creditLimit,
      enabled_,
      minCollateralRatio_, 
      initCollateralRatio_,
      creditLimit_);
    
    // Set CreditFacility to new value
    _creditFacilityMap[account_].enabled = enabled_;
    _creditFacilityMap[account_].minCollateralRatio = minCollateralRatio_;
    _creditFacilityMap[account_].initCollateralRatio = initCollateralRatio_;
    _creditFacilityMap[account_].creditLimit = creditLimit_;
  }
  
  /// @notice Set the global close factor
  /// @param closeFactor_ New close factor value
  function _setCloseFactor(uint closeFactor_) external onlyAdmin {
    
    // `_closeFactor` needs to be between 0 and 1
    require(closeFactor_ <= MANTISSA_FACTORS(), "QAdmin: must be between 0 and 1");

    // Emit the event
    emit SetCloseFactor(_closeFactor, closeFactor_);
    
    // Set `_closeFactor` to new value
    _closeFactor = closeFactor_;
  }

  /// @notice Set the global repayment grace period
  /// @param repaymentGracePeriod_ New repayment grace period
  function _setRepaymentGracePeriod(uint repaymentGracePeriod_) external onlyAdmin {

    // `_repaymentGracePeriod` needs to be <= 60*60*24 (ie 24 hours)
    require(repaymentGracePeriod_ <= 86400, "QAdmin: must be below 1 day");

    // Emit the event
    emit SetRepaymentGracePeriod(_repaymentGracePeriod, repaymentGracePeriod_);

    // set `_repaymentGracePeriod` to new value
    _repaymentGracePeriod = repaymentGracePeriod_;
  }

  /// @notice Set the global maturity grace period
  /// @param maturityGracePeriod_ New maturity grace period
  function _setMaturityGracePeriod(uint maturityGracePeriod_) external onlyAdmin {
    
    // `_maturityGracePeriod` needs to be <= 60*60*24 (ie 24 hours)
    require(maturityGracePeriod_ <= 86400, "QAdmin: must be below 1 day");
    
    // Emit the event
    emit SetMaturityGracePeriod(_maturityGracePeriod, maturityGracePeriod_);
    
    // set `_maturityGracePeriod` to new value
    _maturityGracePeriod = maturityGracePeriod_;
  }
  
  /// @notice Set the global liquidation incetive
  /// @param liquidationIncentive_ New liquidation incentive value
  function _setLiquidationIncentive(uint liquidationIncentive_) external onlyAdmin {

    // `_liquidationIncentive` needs to be greater than or equal to 1
    require(
            liquidationIncentive_ >= MANTISSA_FACTORS(),
            "QAdmin: must be greater than or equal to 1"
            );

    // Emit the event
    emit SetLiquidationIncentive(_liquidationIncentive, liquidationIncentive_);   
    
    // Set `_liquidationIncentive` to new value
    _liquidationIncentive = liquidationIncentive_;
  }

  /// @notice Set the annualized protocol fees for each market in basis points
  /// @param market Address of the `FixedRateMarket` contract
  /// @param protocolFee_ New protocol fee value (scaled to 1e4)
  function _setProtocolFee(IFixedRateMarket market, uint protocolFee_) public onlyAdmin {

    // Max annual protocol fees of 250 basis points
    require(protocolFee_ <= 250, "QAdmin: must be less than 2.5%");

    // Min annual protocol fees of 1 basis point
    require(protocolFee_ >= 1, "QAdmin: must be greater than .01%");
    
    // Emit the event
    emit SetProtocolFee(_protocolFee[market], protocolFee_);
    
    // Set `_protocolFee` to new value
    _protocolFee[market] = protocolFee_;
  }

  /// @notice Set the global threshold in USD for protocol fee transfer
  /// @param thresholdUSD_ New threshold USD value (scaled by 1e6)
  function _setThresholdUSD(uint thresholdUSD_) external {
    _thresholdUSD = thresholdUSD_;
  }

  /** VIEW FUNCTIONS **/
  
  /// @notice Get the address of the `QollateralManager` contract
  function qollateralManager() external view returns(address) {
    return address(_qollateralManager);
  }

  /// @notice Get the address of the `QPriceOracle` contract
  function qPriceOracle() external view returns(address) {
    if(address(_qollateralManager) != address(0)){
      return _qollateralManager.qPriceOracle();
    }else {
      return address(0);
    }
  }

  /// @notice Get the address of the `StakingEmissionsQontroller` contract
  function stakingEmissionsQontroller() external view returns(address) {
    return address(_stakingEmissionsQontroller);
  }

  /// @notice Get the address of the `TradingEmissionsQontroller` contract
  function tradingEmissionsQontroller() external view returns(address) {
    return address(_tradingEmissionsQontroller);
  }

  /// @notice Get the address of the `FeeEmissionsQontroller` contract
  function feeEmissionsQontroller() external view returns(address) {
    return address(_feeEmissionsQontroller);
  }

  /// @notice Get the address of the `veQoda` contract
  function veQoda() external view returns(address) {
    return address(_veQoda);
  }

  /// @notice Get the credit limit with associated address, scaled by 1e6
  function creditLimit(address account_) external view returns(uint) {
    return _creditFacilityMap[account_].enabled? _creditFacilityMap[account_].creditLimit: UINT_MAX();
  }
  
  /// @notice Gets the `Asset` mapped to the address of a ERC20 token
  /// @param token ERC20 token
  /// @return QTypes.Asset Associated `Asset`
  function assets(IERC20 token) external view returns(QTypes.Asset memory) {
    return _assets[token];
  }

  /// @notice Get all enabled `Asset`s
  /// @return address[] iterable list of enabled `Asset`s
  function allAssets() external view returns(address[] memory) {
    return _allAssets;
  }
  
  /// @notice Gets the `CollateralFactor` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint Collateral Factor, scaled by 1e8
  function collateralFactor(IERC20 token) external view returns(uint) {
    return _assets[token].collateralFactor;
  }

  /// @notice Gets the `MarketFactor` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint Market Factor, scaled by 1e8
  function marketFactor(IERC20 token) external view returns(uint) {
    return _assets[token].marketFactor;
  }

  /// @notice Gets the `maturities` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint[] array of UNIX timestamps (in seconds) of the maturity dates
  function maturities(IERC20 token) external view returns(uint[] memory) {
    return _assets[token].maturities;
  }
  
  /// @notice Get the MToken market corresponding to any underlying ERC20
  /// tokenAddress => mTokenAddress
  function underlyingToMToken(IERC20 token) external view returns(address) {
    return _underlyingToMToken[token];
  }
  
  /// @notice Gets the address of the `FixedRateMarket` contract
  /// @param token ERC20 token
  /// @param maturity UNIX timestamp of the maturity date
  /// @return IFixedRateMarket Address of `FixedRateMarket` contract
  function fixedRateMarkets(
                            IERC20 token,
                            uint maturity
                            ) external view returns(IFixedRateMarket){
    return _fixedRateMarkets[token][maturity];
  }

  /// @notice Check whether an address is a valid FixedRateMarket address.
  /// Can be used for checks for inter-contract admin/restricted function call.
  /// @param market `FixedRateMarket` contract
  /// @return bool True if valid false otherwise
  function isMarketEnabled(IFixedRateMarket market) external view returns(bool){
    return _enabledMarkets[market];
  }  

  function minQuoteSize(IFixedRateMarket market) external view returns(uint) {
    return _minQuoteSize[market];
  }
  
  function minCollateralRatio() public view returns(uint){
    return minCollateralRatio(msg.sender);
  }
  
  function minCollateralRatio(address account) public view returns(uint){
    return _creditFacilityMap[account].enabled? _creditFacilityMap[account].minCollateralRatio: _minCollateralRatio;
  }

  function initCollateralRatio() public view returns(uint){
    return initCollateralRatio(msg.sender);
  }
  
  function initCollateralRatio(address account) public view returns(uint){
    return _creditFacilityMap[account].enabled? _creditFacilityMap[account].initCollateralRatio: _initCollateralRatio;
  }

  function closeFactor() public view returns(uint){
    return _closeFactor;
  }

  function repaymentGracePeriod() public view returns(uint){
    return _repaymentGracePeriod;
  }

  function maturityGracePeriod() public view returns(uint){
    return _maturityGracePeriod;
  }
  
  function liquidationIncentive() public view returns(uint){
    return _liquidationIncentive;
  }

  /// @notice Annualized protocol fee in basis points, scaled by 1e4
  function protocolFee(IFixedRateMarket market) public view returns(uint){
    return _protocolFee[market];
  }

  /// @notice threshold in USD where protocol fee from each market will be transferred into `FeeEmissionsQontroller`
  /// once this amount is reached, scaled by 1e6
  function thresholdUSD() external view returns(uint) {
    return _thresholdUSD;
  }
  
  /// @notice 2**256 - 1
  function UINT_MAX() public pure returns(uint){
    return type(uint).max;
  }
  
  /// @notice Generic mantissa corresponding to ETH decimals
  function MANTISSA_DEFAULT() public pure returns(uint){
    return 1e18;
  }

  /// @notice Mantissa for USD
  function MANTISSA_USD() public pure returns(uint){
    return 1e18;
  }
  
  /// @notice Mantissa for collateral ratio
  function MANTISSA_COLLATERAL_RATIO() public pure returns(uint){
    return 1e8;
  }

  /// @notice `assetFactor` and `marketFactor` have up to 8 decimal places precision
  function MANTISSA_FACTORS() public pure returns(uint){
    return 1e8;
  }

  /// @notice Basis points have 4 decimal place precision
  function MANTISSA_BPS() public pure returns(uint){
    return 1e4;
  }

  /// @notice Staked Qoda has 6 decimal place precision
  function MANTISSA_STAKING() public pure returns(uint) {
    return 1e6;
  }

  /// @notice `collateralFactor` cannot be above 1.0
  function MAX_COLLATERAL_FACTOR() public pure returns(uint){
    return 1e8;
  }

  /// @notice `marketFactor` cannot be above 1.0
  function MAX_MARKET_FACTOR() public pure returns(uint){
    return 1e8;
  }
  
  /// @notice version number of this contract, will be bumped upon contractual change
  function VERSION_NUMBER() public pure returns(string memory){
    return "0.2.3 ";
  }
  
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlEnumerableUpgradeable.sol";
import "./AccessControlUpgradeable.sol";
import "../utils/structs/EnumerableSetUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerableUpgradeable is Initializable, IAccessControlEnumerableUpgradeable, AccessControlUpgradeable {
    function __AccessControlEnumerable_init() internal onlyInitializing {
    }

    function __AccessControlEnumerable_init_unchained() internal onlyInitializing {
    }
    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;

    mapping(bytes32 => EnumerableSetUpgradeable.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IFixedRateMarket is IERC20Upgradeable, IERC20MetadataUpgradeable {

  /// @notice Emitted when a borrower repays borrow.
  /// Boolean flag `withQTokens`= true if repaid via qTokens, false otherwise.
  event RepayBorrow(address indexed borrower, uint amount, bool withQTokens);

  /// @notice Emitted when a borrower is liquidated
  event LiquidateBorrow(
    address indexed borrower,
    address indexed liquidator,
    uint amount,
    address collateralTokenAddress,
    uint reward
  );

  /// @notice Emitted when a borrower and lender are matched for a fixed rate loan
  event FixedRateLoan(
    bytes32 indexed quoteId,
    address indexed borrower,
    address indexed lender,
    uint amountPV,
    uint amountFV,
    uint feeIncurred);

  /// @notice Emitted when an account cancels their Quote
  event CancelQuote(address indexed account, uint nonce);

  /// @notice Emitted when an account redeems their qTokens
  event RedeemQTokens(address indexed account, uint amount);
    
  /** USER INTERFACE **/

  /// @notice Execute against Quote as a borrower.
  /// @param amountPV Amount that the borrower wants to execute as PV
  /// @param lender Account of the lender
  /// @param quoteType *Lender's* type preference, 0 for PV+APR, 1 for FV+APR
  /// @param quoteExpiryTime Timestamp after which the quote is no longer valid
  /// @param APR In decimal form scaled by 1e4 (ex. 10.52% = 1052)
  /// @param cashflow Can be PV or FV depending on `quoteType`
  /// @param nonce For uniqueness of signature
  /// @param signature signed hash of the Quote message
  /// @return uint, uint Loan amount (`amountPV`) and repayment amount (`amountFV`)
  function borrow(
                  uint amountPV,
                  address lender,
                  uint8 quoteType,
                  uint64 quoteExpiryTime,
                  uint64 APR,
                  uint cashflow,
                  uint nonce,
                  bytes memory signature
                  ) external returns(uint, uint);

  /// @notice Execute against Quote as a lender.
  /// @param amountPV Amount that the lender wants to execute as PV
  /// @param borrower Account of the borrower
  /// @param quoteType *Borrower's* type preference, 0 for PV+APR, 1 for FV+APR
  /// @param quoteExpiryTime Timestamp after which the quote is no longer valid
  /// @param APR In decimal form scaled by 1e4 (ex. 10.52% = 1052)
  /// @param cashflow Can be PV or FV depending on `quoteType`
  /// @param nonce For uniqueness of signature
  /// @param signature signed hash of the Quote message
  /// @return uint, uint Loan amount (`amountPV`) and repayment amount (`amountFV`)
  function lend(
                uint amountPV,
                address borrower,
                uint8 quoteType,
                uint64 quoteExpiryTime,
                uint64 APR,
                uint cashflow,
                uint nonce,
                bytes memory signature
                ) external returns(uint, uint);
  
  /// @notice Borrower will make repayments to the smart contract, which
  /// holds the value in escrow until maturity to release to lenders.
  /// @param amount Amount to repay
  /// @return uint Remaining account borrow amount
  function repayBorrow(uint amount) external returns(uint);

  /// @notice By setting the nonce in `_voidNonces` to true, this is equivalent to
  /// invalidating the Quote (i.e. cancelling the quote)
  /// param nonce Nonce of the Quote to be cancelled
  function cancelQuote(uint nonce) external;

  /// @notice This function allows net lenders to redeem qTokens for the
  /// underlying token. Redemptions may only be permitted after loan maturity
  /// plus `_maturityGracePeriod`. The public interface redeems specified amount
  /// of qToken from existing balance.
  /// @param amount Amount of qTokens to redeem
  /// @return uint Amount of qTokens redeemed
  function redeemQTokensByRatio(uint amount) external returns(uint);

  /// @notice This function allows net lenders to redeem qTokens for the
  /// underlying token. Redemptions may only be permitted after loan maturity
  /// plus `_maturityGracePeriod`. The public interface redeems the entire qToken
  /// balance.
  /// @return uint Amount of qTokens redeemed
  function redeemAllQTokensByRatio() external returns(uint);

  /// @notice Get amount of qTokens user can redeem based on current loan repayment ratio
  /// @return uint amount of qTokens user can redeem
  function redeemableQTokens() external view returns(uint);
  
  /// @notice Get amount of qTokens user can redeem based on current loan repayment ratio
  /// @param account Account to query
  /// @return uint amount of qTokens user can redeem
  function redeemableQTokens(address account) external view returns(uint);

  /// @notice If an account is in danger of being undercollateralized (i.e.
  /// collateralRatio < 1.0) or has not repaid past maturity plus `_repaymentGracePeriod`,
  /// any user may liquidate that account by paying back the loan on behalf of the account. 
  /// In return, the liquidator receives collateral belonging to the account equal in value to 
  /// the repayment amount in USD plus the liquidation incentive amount as a bonus.
  /// @param borrower Address of account that is undercollateralized
  /// @param amount Amount to repay on behalf of account
  /// @param collateralToken Liquidator's choice of which currency to be paid in
  function liquidateBorrow(
                           address borrower,
                           uint amount,
                           IERC20 collateralToken
                           ) external;
  
  /** VIEW FUNCTIONS **/
  
  /// @notice Get the address of the `QAdmin` contract
  /// @return address Address of `QAdmin` contract
  function qAdmin() external view returns(address);
  
  /// @notice Get the address of the `QollateralManager`
  /// @return address
  function qollateralManager() external view returns(address);

  /// @notice Get the address of the ERC20 token which the loan will be denominated
  /// @return IERC20
  function underlyingToken() external view returns(IERC20);

  /// @notice Get the UNIX timestamp (in seconds) when the market matures
  /// @return uint
  function maturity() external view returns(uint);

  /// @notice Get the minimum quote size for this market
  /// @return uint Minimum quote size, in PV terms, local currency
  function minQuoteSize() external view returns(uint);
  
  /// @notice True if a nonce for a Quote is voided, false otherwise.
  /// Used for checking if a Quote is a duplicated.
  /// @param account Account to query
  /// @param nonce Nonce to query
  /// @return bool True if used, false otherwise
  function isNonceVoid(address account, uint nonce) external view returns(bool);

  /// @notice Get the total balance of borrows by user
  /// @param account Account to query
  /// @return uint Borrows
  function accountBorrows(address account) external view returns(uint);

  /// @notice Get the current total partial fill for a Quote
  /// @param quoteId ID of the Quote - this is the keccak256 hash of the signature
  /// @return uint Partial fill
  function quoteFill(bytes32 quoteId) external view returns(uint);

  /// @notice Get the `protocolFee` associated with this market
  /// @return uint annualized protocol fee, scaled by 1e4
  function protocolFee() external view returns(uint);

  /// @notice Get the `protocolFee` associated with this market, prorated by time till maturity 
  /// @param amount loan amount
  /// @param timeNow block timestamp for calculating time till maturity 
  /// @return uint prorated protocol fee, scaled by 1e4
  function proratedProtocolFee(uint amount, uint timeNow) external view returns(uint);

  /// @notice Get the `protocolFee` associated with this market, prorated by time till maturity from now 
  /// @param amount loan amount
  /// @return uint prorated protocol fee, scaled by 1e4
  function proratedProtocolFeeNow(uint amount) external view returns(uint);

  /// @notice Gets the current `redemptionRatio` where owned qTokens can be redeemed up to
  /// @return uint redemption ratio, capped and scaled by 1e18
  function redemptionRatio() external view returns(uint);

  /// @notice Tokens redeemed across all users so far
  /// @return uint redeemed amount of qToken
  function tokensRedeemedTotal() external view returns(uint);

  /// @notice Get total protocol fee accrued in this market so far, in local currency
  /// @return uint accrued fee
  function totalAccruedFees() external view returns(uint);

}

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./IFixedRateMarket.sol";

interface IQollateralManager {

  /// @notice Emitted when an account deposits collateral into the contract
  event DepositCollateral(address indexed account, address tokenAddress, uint amount);

  /// @notice Emitted when an account withdraws collateral from the contract
  event WithdrawCollateral(address indexed account, address tokenAddress, uint amount);
  
  /// @notice Emitted when an account first interacts with the `Market`
  event AddAccountMarket(address indexed account, address indexed market);

  /// @notice Emitted when collateral is transferred from one account to another
  event TransferCollateral(address indexed tokenAddress, address indexed from, address indexed to, uint amount);
  
  /// @notice Constructor for upgradeable contracts
  /// @param qAdminAddress_ Address of the `QAdmin` contract
  /// @param qPriceOracleAddress_ Address of the `QPriceOracle` contract
  function initialize(address qAdminAddress_, address qPriceOracleAddress_) external;

 /** ADMIN/RESTRICTED FUNCTIONS **/

  /// @notice Record when an account has either borrowed or lent into a
  /// `FixedRateMarket`. This is necessary because we need to iterate
  /// across all markets that an account has borrowed/lent to to calculate their
  /// `borrowValue`. Only the `FixedRateMarket` contract itself may call
  /// this function
  /// @param account User account
  /// @param market Address of the `FixedRateMarket` market
  function _addAccountMarket(address account, IFixedRateMarket market) external;

  /// @notice Transfer collateral balances from one account to another. Only
  /// `FixedRateMarket` contracts can call this restricted function. This is used
  /// for when a liquidator liquidates an account.
  /// @param token ERC20 token
  /// @param from Sender address
  /// @param to Recipient address
  /// @param amount Amount to transfer
  function _transferCollateral(IERC20 token, address from, address to, uint amount) external;
  
  /** USER INTERFACE **/
  
  /// @notice Users call this to deposit collateral to fund their borrows
  /// @param token ERC20 token
  /// @param amount Amount to deposit (in local ccy)
  /// @return uint New collateral balance
  function depositCollateral(IERC20 token, uint amount) external returns(uint);

  /// @notice Users call this to deposit collateral to fund their borrows, where their
  /// collateral is automatically wrapped into MTokens for convenience so users can
  /// automatically earn interest on their collateral.
  /// @param underlying Underlying ERC20 token
  /// @param amount Amount to deposit (in underlying local currency)
  /// @return uint New collateral balance (in MToken balance)
  function depositCollateralWithMTokenWrap(IERC20 underlying, uint amount) external returns(uint);
  
  /// @notice Users call this to withdraw collateral
  /// @param token ERC20 token
  /// @param amount Amount to withdraw (in local ccy)
  /// @return uint New collateral balance
  function withdrawCollateral(IERC20 token, uint amount) external returns(uint);

  /// @notice Users call this to withdraw mToken collateral, where their
  /// collateral is automatically unwrapped into underlying tokens for
  /// convenience.
  /// @param mTokenAddress Yield-bearing token address
  /// @param amount Amount to withdraw (in mToken local currency)
  /// @return uint New collateral balance (in MToken balance)
  function withdrawCollateralWithMTokenUnwrap(
                                              address mTokenAddress,
                                              uint amount
                                              ) external returns(uint);
  
  /** VIEW FUNCTIONS **/

  /// @notice Get the address of the `QAdmin` contract
  /// @return address Address of `QAdmin` contract
  function qAdmin() external view returns(address);

  /// @notice Get the address of the `QPriceOracle` contract
  /// @return address Address of `QPriceOracle` contract
  function qPriceOracle() external view returns(address);

  /// @notice Get all enabled `Asset`s
  /// @return address[] iterable list of enabled `Asset`s
  function allAssets() external view returns(address[] memory);
  
  /// @notice Gets the `CollateralFactor` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint Collateral Factor, scaled by 1e8
  function collateralFactor(IERC20 token) external view returns(uint);

  /// @notice Gets the `MarketFactor` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint Market Factor, scaled by 1e8
  function marketFactor(IERC20 token) external view returns(uint);
  
  /// @notice Return what the collateral ratio for an account would be
  /// with a hypothetical collateral withdraw/deposit and/or token borrow/lend.
  /// The collateral ratio is calculated as:
  /// (`virtualCollateralValue` / `virtualBorrowValue`)
  /// If the returned value falls below 1e8, the account can be liquidated
  /// @param account User account
  /// @param hypotheticalToken Currency of hypothetical withdraw / deposit
  /// @param withdrawAmount Amount of hypothetical withdraw in local currency
  /// @param depositAmount Amount of hypothetical deposit in local currency
  /// @param hypotheticalMarket Market of hypothetical borrow
  /// @param borrowAmount Amount of hypothetical borrow in local ccy
  /// @param lendAmount Amount of hypothetical lend in local ccy
  /// @return uint Hypothetical collateral ratio
  function hypotheticalCollateralRatio(
                                       address account,
                                       IERC20 hypotheticalToken,
                                       uint withdrawAmount,
                                       uint depositAmount,
                                       IFixedRateMarket hypotheticalMarket,
                                       uint borrowAmount,
                                       uint lendAmount
                                       ) external view returns(uint);

  /// @notice Return the current collateral ratio for an account.
  /// The collateral ratio is calculated as:
  /// (`virtualCollateralValue` / `virtualBorrowValue`)
  /// If the returned value falls below 1e8, the account can be liquidated
  /// @param account User account
  /// @return uint Collateral ratio
  function collateralRatio(address account) external view returns(uint);
  
  /// @notice Get the `collateralFactor` weighted value (in USD) of all the
  /// collateral deposited for an account
  /// @param account Account to query
  /// @return uint Total value of account in USD, scaled to 1e18
  function virtualCollateralValue(address account) external view returns(uint);
  
  /// @notice Get the `collateralFactor` weighted value (in USD) for the tokens
  /// deposited for an account
  /// @param account Account to query
  /// @param token ERC20 token
  /// @return uint Value of token collateral of account in USD, scaled to 1e18
  function virtualCollateralValueByToken(
                                         address account,
                                         IERC20 token
                                         ) external view returns(uint);

  /// @notice Get the `marketFactor` weighted net borrows (i.e. borrows - lends)
  /// in USD summed across all `Market`s participated in by the user
  /// @param account Account to query
  /// @return uint Borrow value of account in USD, scaled to 1e18
  function virtualBorrowValue(address account) external view returns(uint);
  
  /// @notice Get the `marketFactor` weighted net borrows (i.e. borrows - lends)
  /// in USD for a particular `Market`
  /// @param account Account to query
  /// @param market `FixedRateMarket` contract
  /// @return uint Borrow value of account in USD, scaled to 1e18
  function virtualBorrowValueByMarket(
                                      address account,
                                      IFixedRateMarket market
                                      ) external view returns(uint);

  /// @notice Return what the weighted total borrow value for an account would be with a hypothetical borrow  
  /// @param account Account to query
  /// @param hypotheticalMarket Market of hypothetical borrow / lend
  /// @param borrowAmount Amount of hypothetical borrow in local ccy
  /// @param lendAmount Amount of hypothetical lend in local ccy
  /// @return uint Borrow value of account in USD, scaled to 1e18
  function hypotheticalVirtualBorrowValue(
                                          address account,
                                          IFixedRateMarket hypotheticalMarket,
                                          uint borrowAmount,
                                          uint lendAmount
                                          ) external view returns(uint);
  
  /// @notice Get the unweighted value (in USD) of all the collateral deposited
  /// for an account
  /// @param account Account to query
  /// @return uint Total value of account in USD, scaled to 1e18
  function realCollateralValue(address account) external view returns(uint);
  
  /// @notice Get the unweighted value (in USD) of the tokens deposited
  /// for an account
  /// @param account Account to query
  /// @param token ERC20 token
  /// @return uint Value of token collateral of account in USD, scaled to 1e18
  function realCollateralValueByToken(
                                      address account,
                                      IERC20 token
                                      ) external view returns(uint);
  
  /// @notice Get the unweighted current net value borrowed (i.e. borrows - lends)
  /// in USD summed across all `Market`s participated in by the user
  /// @param account Account to query
  /// @return uint Borrow value of account in USD, scaled to 1e18
  function realBorrowValue(address account) external view returns(uint);

  /// @notice Get the unweighted current net value borrowed (i.e. borrows - lends)
  /// in USD for a particular `Market`
  /// @param account Account to query
  /// @param market `FixedRateMarket` contract
  /// @return uint Borrow value of account in USD, scaled to 1e18
  function realBorrowValueByMarket(
                                   address account,
                                   IFixedRateMarket market
                                   ) external view returns(uint);
  
  /// @notice Get an account's maximum available borrow amount in a specific FixedRateMarket.
  /// For example, what is the maximum amount of GLMRJUL22 that an account can borrow
  /// while ensuring their account health continues to be acceptable?
  /// Note: This function will return 0 if market to borrow is disabled
  /// Note: This function will return creditLimit() if maximum amount allowed for one market exceeds creditLimit()
  /// Note: User can only borrow up to `initCollateralRatio` for their own protection against instant liquidations
  /// @param account User account
  /// @param borrowMarket Address of the `FixedRateMarket` market to borrow
  /// @return uint Maximum available amount user can borrow (in FV) without breaching `initCollateralRatio`
  function hypotheticalMaxBorrowFV(address account, IFixedRateMarket borrowMarket) external view returns(uint);

  /// @notice Get the minimum collateral ratio. Scaled by 1e8.
  /// @return uint Minimum collateral ratio
  function minCollateralRatio() external view returns(uint);
  
  /// @notice Get the minimum collateral ratio for a user account. Scaled by 1e8.
  /// @param account User account 
  /// @return uint Minimum collateral ratio
  function minCollateralRatio(address account) external view returns(uint);
  
  /// @notice Get the initial collateral ratio. Scaled by 1e8
  /// @return uint Initial collateral ratio
  function initCollateralRatio() external view returns(uint);
  
  /// @notice Get the initial collateral ratio for a user account. Scaled by 1e8
  /// @param account User account 
  /// @return uint Initial collateral ratio
  function initCollateralRatio(address account) external view returns(uint);
  
  /// @notice Get the close factor. Scaled by 1e8
  /// @return uint Close factor
  function closeFactor() external view returns(uint);

  /// @notice Get the liquidation incentive. Scaled by 1e8
  /// @return uint Liquidation incentive
  function liquidationIncentive() external view returns(uint);
  
  /// @notice Use this for quick lookups of collateral balances by asset
  /// @param account User account
  /// @param token ERC20 token
  /// @return uint Balance in local
  function collateralBalance(address account, IERC20 token) external view returns(uint);

  /// @notice Get iterable list of collateral addresses which an account has nonzero balance.
  /// @param account User account
  /// @return address[] Iterable list of ERC20 token addresses
  function iterableCollateralAddresses(address account) external view returns(IERC20[] memory);

  /// @notice Quick lookup of whether an account has a particular collateral
  /// @param account User account
  /// @param token ERC20 token addresses
  /// @return bool True if account has collateralized with given ERC20 token, false otherwise
  function accountCollateral(address account, IERC20 token) external view returns(bool);

  /// @notice Get iterable list of all Markets which an account has participated
  /// @param account User account
  /// @return address[] Iterable list of `FixedRateLoanMarket` contract addresses
  function iterableAccountMarkets(address account) external view returns(IFixedRateMarket[] memory);
                                                                         
  /// @notice Quick lookup of whether an account has participated in a Market
  /// @param account User account
  /// @param market`FixedRateLoanMarket` contract
  /// @return bool True if participated, false otherwise
  function accountMarkets(address account, IFixedRateMarket market) external view returns(bool);
                                                                       
  /// @notice Converts any local value into its value in USD using oracle feed price
  /// @param token ERC20 token
  /// @param amountLocal Amount denominated in terms of the ERC20 token
  /// @return uint Amount in USD, scaled to 1e18
  function localToUSD(IERC20 token, uint amountLocal) external view returns(uint);

  /// @notice Converts any value in USD into its value in local using oracle feed price
  /// @param token ERC20 token
  /// @param valueUSD Amount in USD
  /// @return uint Amount denominated in terms of the ERC20 token
  function USDToLocal(IERC20 token, uint valueUSD) external view returns(uint);
}

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IFeeEmissionsQontroller {

  /// @notice Emitted when user claims emissions
  event ClaimEmissions(address account, uint amount);

  /// @notice Emitted when fee is accrued in a round
  event FeesAccrued(uint round, address token, uint amount, uint amountInRound);

  /// @notice Emitted when we move to a new round
  event NewFeeEmissionsRound(uint indexed currentPeriod, uint startBlock, uint endBlock);

  /** ACCESS CONTROLLED FUNCTIONS **/

  function receiveFees(IERC20 underlyingToken, uint feeLocal) external;

  function veIncrease(address account, uint veIncreased) external;

  function veReset(address account) external;

  /** USER INTERFACE **/

  function claimEmissions() external;

  function claimEmissions(address account) external;


  /** VIEW FUNCTIONS **/
  
  function claimableEmissions(address account) external view returns(uint);

  function qAdmin() external view returns (address);

  function veToken() external view returns (address);

  function swapContract() external view returns (address);

  function WETH() external view returns (IERC20);

  function emissionsRound() external view returns (uint, uint, uint);
  
  function emissionsRound(uint round_) external view returns (uint, uint, uint);

  function blocksTillRoundEnd() external view returns (uint);

  function stakedVeAtRound(address account, uint round) external view returns (uint);

  function roundInterval() external view returns (uint);

  function currentRound() external view returns (uint);

  function lastClaimedRound() external view returns (uint);

  function lastClaimedRound(address account) external view returns (uint);

  function lastClaimedVeBalance() external view returns (uint);

  function lastClaimedVeBalance(address account) external view returns (uint);

  function totalFeesAccrued() external view returns (uint);

  function totalFeesClaimed() external view returns (uint);

}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

interface IStakingEmissionsQontroller {

  /** EVENTS **/
  
  /// @notice Emitted when we move to a new emissions regime
  event NewEmissionsPerBlock(uint indexed currentPeriod, uint startBlock, uint emissions, uint numBlocks);

  /// @notice Emitted when user claims emissions
  event ClaimEmissions(address indexed account, uint emission);
  
  /// @notice Emitted when user deposits
  event Deposit(address indexed account, uint amount);

  /// @notice Emitted when user withdraws
  event Withdraw(address indexed account, uint amount);
  
  /** ACCESS CONTROLLED FUNCTIONS **/
  
  /// @notice Credits the account with the given amount in `StakingEmissionsQontroller`
  /// This function should only be called by the veToken contract when the user
  /// claims their accrued veTokens.
  /// @param account Address of the user
  /// @param amount Amount to credit the account
  function deposit(address account, uint amount) external;

  /// @notice Cancels account's full amount and debt from `StakingEmissionsQontroller`
  /// and claims any remaining emissions for that account. This should only
  /// be called by the veToken contract when the user unstakes the underlying
  /// @param account Address of the user.
  function withdraw(address account) external;
  
  /// @notice Function to start reward distribution, can only be invoked once.
  /// @param startBlock starting block for reward distribution, 0 for current block
  function _startStaking(uint startBlock) external;

  /** USER INTERFACE **/

  /// @notice Transfer accrued emissions from `StakingEmissionsQontroller` to veToken holder
  /// This function can be called by the user anytime and as often as they wish.
  function claimEmissions() external;

  /// @notice Update emissions variables of the pool
  function updatePool() external;

  /** VIEW FUNCTIONS **/

  /// @notice Calculates the amount of emissions claimable by a user by updating
  /// the pool info in memory without writing to storage so that viewing the
  /// claimable amount does not incur gas costs.
  /// @param account Address of the user
  /// @return uint Amount claimable
  function claimableEmissions(address account) external view returns(uint);

  /// @notice Get the address of the `QAdmin` contract
  /// @return address Address of `QAdmin` contract
  function qAdmin() external view returns(address);
  
  /// @notice Get the address of the `QodaERC20` contract
  /// @return address Address of `QodaERC20` contract
  function qodaERC20() external view returns(address);

  /// @notice Get the address of the `veQoda` contract
  /// @return address Address of `veQoda` contract
  function veToken() external view returns(address);

  function numPeriods() external view returns(uint);
  
  function accTokenPerShare() external view returns(uint);

  function currentPeriod() external view returns(uint);

  function endBlock() external view returns(uint);

  function lastEmissionsBlock() external view returns(uint);

  function emissions() external view returns(uint);

  function numBlocks() external view returns(uint);

  // @return emissions per block, scaled by 1e6
  function emissionsPerBlock() external view returns(uint);

  function userInfo(address account) external view returns(uint, uint);
  
  function stakingPeriod(uint i) external view returns(uint, uint);
  
}

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

interface ITradingEmissionsQontroller {

  /** ACCESS CONTROLLED FUNCTIONS **/
  
  /// @notice Use the fees generated (in USD) as basis to calculate how much
  /// token reward to disburse for trading volumes. Only `FixedRateMarket`
  /// contracts may call this function.
  /// @param borrower Address of the borrower
  /// @param lender Address of the lender
  /// @param feeUSD Fees generated (in USD, scaled to 1e18)
  function updateRewards(address borrower, address lender, uint feeUSD) external;

  
  /** USER INTERFACE **/

  /// @notice Mint the unclaimed rewards to user and reset their claimable emissions
  function claimEmissions() external;

  
  /** VIEW FUNCTIONS **/

  /// @notice Checks the amount of unclaimed trading rewards that the user can claim
  /// @param account Address of the user
  /// @return uint Amount of QODA token rewards the user may claim
  function claimableEmissions(address account) external view returns(uint);

  /// @notice Get the address of the `QAdmin` contract
  /// @return address Address of `QAdmin` contract
  function qAdmin() external view returns(address);

  /// @notice Get the address of the `QodaERC20` contract
  /// @return address Address of `QodaERC20` contract
  function qodaERC20() external view returns(address);

  function numPhases() external view returns(uint);

  function currentPhase() external view returns(uint);

  function totalAllocation() external view returns(uint);

  function emissionsPhase(uint phase) external view returns(uint, uint, uint);
  
}

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

import "@openzeppelin/contracts-upgradeable/access/IAccessControlUpgradeable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./IFixedRateMarket.sol";
import "../libraries/QTypes.sol";

interface IQAdmin is IAccessControlUpgradeable {

  /// @notice Emitted when a new FixedRateMarket is deployed
  event CreateFixedRateMarket(address indexed marketAddress, address indexed tokenAddress, uint maturity);
  
  /// @notice Emitted when a new `Asset` is added
  event AddAsset(
                 address indexed tokenAddress,
                 bool isYieldBearing,
                 address oracleFeed,
                 uint collateralFactor,
                 uint marketFactor);

  /// @notice Emitted when setting `_qollateralManager`
  event SetQollateralManager(address qollateralManagerAddress);

  /// @notice Emitted when setting `_stakingEmissionsQontroller`
  event SetStakingEmissionsQontroller(address stakingEmissionsQontrollerAddress);

  /// @notice Emitted when setting `_tradingEmissionsQontroller`
  event SetTradingEmissionsQontroller(address tradingEmissionsQontrollerAddress);

  /// @notice Emitted when setting `_feeEmissionsQontroller`
  event SetFeeEmissionsQontroller(address feeEmissionsQontrollerAddress);

  /// @notice Emitted when setting `_veQoda`
  event SetVeQoda(address veQodaAddress);
  
  /// @notice Emitted when setting `collateralFactor`
  event SetCollateralFactor(address indexed tokenAddress, uint oldValue, uint newValue);

  /// @notice Emitted when setting `marketFactor`
  event SetMarketFactor(address indexed tokenAddress, uint oldValue, uint newValue);

  /// @notice Emitted when setting `minQuoteSize`
  event SetMinQuoteSize(address indexed tokenAddress, uint oldValue, uint newValue);
  
  /// @notice Emitted when `_minCollateralRatioDefault` and `_initCollateralRatioDefault` get updated
  event SetCollateralRatio(uint oldMinValue, uint oldInitValue, uint newMinValue, uint newInitValue);
  
  /// @notice Emitted when `CreditFacility` gets updated
  event SetCreditFacility(address account, bool oldEnabled, uint oldMinValue, uint oldInitValue, uint oldCreditValue, bool newEnabled, uint newMinValue, uint newInitValue, uint newCreditValue);
  
  /// @notice Emitted when `_closeFactor` gets updated
  event SetCloseFactor(uint oldValue, uint newValue);

  /// @notice Emitted when `_repaymentGracePeriod` gets updated
  event SetRepaymentGracePeriod(uint oldValue, uint newValue);
  
  /// @notice Emitted when `_maturityGracePeriod` gets updated
  event SetMaturityGracePeriod(uint oldValue, uint newValue);
  
  /// @notice Emitted when `_liquidationIncentive` gets updated
  event SetLiquidationIncentive(uint oldValue, uint newValue);

  /// @notice Emitted when `_protocolFee` gets updated
  event SetProtocolFee(uint oldValue, uint newValue);
  
  /** ADMIN FUNCTIONS **/

  /// @notice Call upon initialization after deploying `QollateralManager` contract
  /// @param qollateralManagerAddress Address of `QollateralManager` deployment
  function _setQollateralManager(address qollateralManagerAddress) external;

  /// @notice Call upon initialization after deploying `StakingEmissionsQontroller` contract
  /// @param stakingEmissionsQontrollerAddress Address of `StakingEmissionsQontroller` deployment
  function _setStakingEmissionsQontroller(address stakingEmissionsQontrollerAddress) external;

  /// @notice Call upon initialization after deploying `TradingEmissionsQontroller` contract
  /// @param tradingEmissionsQontrollerAddress Address of `TradingEmissionsQontroller` deployment
  function _setTradingEmissionsQontroller(address tradingEmissionsQontrollerAddress) external;

  /// @notice Call upon initialization after deploying `FeeEmissionsQontroller` contract
  /// @param feeEmissionsQontrollerAddress Address of `FeeEmissionsQontroller` deployment
  function _setFeeEmissionsQontroller(address feeEmissionsQontrollerAddress) external;

  /// @notice Call upon initialization after deploying `veQoda` contract
  /// @param veQodaAddress Address of `veQoda` deployment
  function _setVeQoda(address veQodaAddress) external;
  
  /// @notice Set credit facility for specified account
  /// @param account_ account for credit facility adjustment
  /// @param enabled_ If credit facility should be enabled
  /// @param minCollateralRatio_ New minimum collateral ratio value
  /// @param initCollateralRatio_ New initial collateral ratio value
  /// @param creditLimit_ new credit limit in USD, scaled by 1e18
  function _setCreditFacility(address account_, bool enabled_, uint minCollateralRatio_, uint initCollateralRatio_, uint creditLimit_) external;
  
  /// @notice Admin function for adding new Assets. An Asset must be added before it
  /// can be used as collateral or borrowed. Note: We can create functionality for
  /// allowing borrows of a token but not using it as collateral by setting
  /// `collateralFactor` to zero.
  /// @param token ERC20 token corresponding to the Asset
  /// @param isYieldBearing True if token bears interest (eg aToken, cToken, mToken, etc)
  /// @param underlying Address of the underlying token
  /// @param oracleFeed Chainlink price feed address
  /// @param collateralFactor 0.0 to 1.0 (scaled to 1e8) for discounting risky assets
  /// @param marketFactor 0.0 to 1.0 (scaled to 1e8) for premium on risky borrows
  function _addAsset(
                     IERC20 token,
                     bool isYieldBearing,
                     address underlying,
                     address oracleFeed,
                     uint collateralFactor,
                     uint marketFactor
                     ) external;

  /// @notice Adds a new `FixedRateMarket` contract into the internal mapping of
  /// whitelisted market addresses
  /// @param market New `FixedRateMarket` contract address
  /// @param protocolFee_ Corresponding protocol fee in basis points
  /// @param minQuoteSize_ Size in PV terms, local currency
  function _addFixedRateMarket(
                               IFixedRateMarket market,
                               uint protocolFee_,
                               uint minQuoteSize_
                               ) external;
  
  /// @notice Update the `collateralFactor` for a given `Asset`
  /// @param token ERC20 token corresponding to the Asset
  /// @param collateralFactor 0.0 to 1.0 (scaled to 1e8) for discounting risky assets
  function _setCollateralFactor(IERC20 token, uint collateralFactor) external;

  /// @notice Update the `marketFactor` for a given `Asset`
  /// @param token Address of the token corresponding to the Asset
  /// @param marketFactor 0.0 to 1.0 (scaled to 1e8) for discounting risky assets
  function _setMarketFactor(IERC20 token, uint marketFactor) external;

  /// @notice Set the minimum quote size for a particular `FixedRateMarket`
  /// @param market Address of the `FixedRateMarket` contract
  /// @param minQuoteSize_ Size in PV terms, local currency
  function _setMinQuoteSize(IFixedRateMarket market, uint minQuoteSize_) external;
  
  /// @notice Set the global minimum and initial collateral ratio
  /// @param minCollateralRatio_ New global minimum collateral ratio value
  /// @param initCollateralRatio_ New global initial collateral ratio value
  function _setCollateralRatio(uint minCollateralRatio_, uint initCollateralRatio_) external;
  
  /// @notice Set the global close factor
  /// @param closeFactor_ New close factor value
  function _setCloseFactor(uint closeFactor_) external;

  /// @notice Set the global repayment grace period
  /// @param repaymentGracePeriod_ New repayment grace period
  function _setRepaymentGracePeriod(uint repaymentGracePeriod_) external;

  /// @notice Set the global maturity grace period
  /// @param maturityGracePeriod_ New maturity grace period
  function _setMaturityGracePeriod(uint maturityGracePeriod_) external;
  
  /// @notice Set the global liquidation incetive
  /// @param liquidationIncentive_ New liquidation incentive value
  function _setLiquidationIncentive(uint liquidationIncentive_) external;

  /// @notice Set the global annualized protocol fees for each market in basis points
  /// @param market Address of the `FixedRateMarket` contract
  /// @param protocolFee_ New protocol fee value (scaled to 1e4)
  function _setProtocolFee(IFixedRateMarket market, uint protocolFee_) external;
  
  /// @notice Set the global threshold in USD for protocol fee transfer
  /// @param thresholdUSD_ New threshold USD value (scaled by 1e6)
  function _setThresholdUSD(uint thresholdUSD_) external;
  
  /** VIEW FUNCTIONS **/

  function ADMIN_ROLE() external view returns(bytes32);

  function MARKET_ROLE() external view returns(bytes32);

  function MINTER_ROLE() external view returns(bytes32);

  function VETOKEN_ROLE() external view returns(bytes32);
  
  /// @notice Get the address of the `QollateralManager` contract
  function qollateralManager() external view returns(address);

  /// @notice Get the address of the `QPriceOracle` contract
  function qPriceOracle() external view returns(address);

  /// @notice Get the address of the `StakingEmissionsQontroller` contract
  function stakingEmissionsQontroller() external view returns(address);

  /// @notice Get the address of the `TradingEmissionsQontroller` contract
  function tradingEmissionsQontroller() external view returns(address);

  /// @notice Get the address of the `FeeEmissionsQontroller` contract
  function feeEmissionsQontroller() external view returns(address);

  /// @notice Get the address of the `veQoda` contract
  function veQoda() external view returns(address);

  /// @notice Get the credit limit with associated address, scaled by 1e18
  function creditLimit(address account_) external view returns(uint);
  
  /// @notice Gets the `Asset` mapped to the address of a ERC20 token
  /// @param token ERC20 token
  /// @return QTypes.Asset Associated `Asset`
  function assets(IERC20 token) external view returns(QTypes.Asset memory);

  /// @notice Get all enabled `Asset`s
  /// @return address[] iterable list of enabled `Asset`s
  function allAssets() external view returns(address[] memory);
  
  /// @notice Gets the `CollateralFactor` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint Collateral Factor, scaled by 1e8
  function collateralFactor(IERC20 token) external view returns(uint);

  /// @notice Gets the `MarketFactor` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint Market Factor, scaled by 1e8
  function marketFactor(IERC20 token) external view returns(uint);

  /// @notice Gets the `maturities` associated with a ERC20 token
  /// @param token ERC20 token
  /// @return uint[] array of UNIX timestamps (in seconds) of the maturity dates
  function maturities(IERC20 token) external view returns(uint[] memory);
  
  /// @notice Get the MToken market corresponding to any underlying ERC20
  /// tokenAddress => mTokenAddress
  function underlyingToMToken(IERC20 token) external view returns(address);
  
  /// @notice Gets the address of the `FixedRateMarket` contract
  /// @param token ERC20 token
  /// @param maturity UNIX timestamp of the maturity date
  /// @return IFixedRateMarket Address of `FixedRateMarket` contract
  function fixedRateMarkets(IERC20 token, uint maturity) external view returns(IFixedRateMarket);

  /// @notice Check whether an address is a valid FixedRateMarket address.
  /// Can be used for checks for inter-contract admin/restricted function call.
  /// @param market `FixedRateMarket` contract
  /// @return bool True if valid false otherwise
  function isMarketEnabled(IFixedRateMarket market) external view returns(bool);

  function minQuoteSize(IFixedRateMarket market) external view returns(uint);
  
  function minCollateralRatio() external view returns(uint);
  
  function minCollateralRatio(address account) external view returns(uint);
  
  function initCollateralRatio() external view returns(uint);
  
  function initCollateralRatio(address account) external view returns(uint);
  
  function closeFactor() external view returns(uint);

  function repaymentGracePeriod() external view returns(uint);
  
  function maturityGracePeriod() external view returns(uint);
  
  function liquidationIncentive() external view returns(uint);

  /// @notice Annualized protocol fee in basis points, scaled by 1e4
  function protocolFee(IFixedRateMarket market) external view returns(uint);

  /// @notice threshold in USD where protocol fee from each market will be transferred into `FeeEmissionsQontroller`
  /// once this amount is reached, scaled by 1e6
  function thresholdUSD() external view returns(uint);
  
  /// @notice 2**256 - 1
  function UINT_MAX() external pure returns(uint);
  
  /// @notice Generic mantissa corresponding to ETH decimals
  function MANTISSA_DEFAULT() external pure returns(uint);

  /// @notice Mantissa for USD
  function MANTISSA_USD() external pure returns(uint);
  
  /// @notice Mantissa for collateral ratio
  function MANTISSA_COLLATERAL_RATIO() external pure returns(uint);

  /// @notice `assetFactor` and `marketFactor` have up to 8 decimal places precision
  function MANTISSA_FACTORS() external pure returns(uint);

  /// @notice Basis points have 4 decimal place precision
  function MANTISSA_BPS() external pure returns(uint);

  /// @notice Staked Qoda has 6 decimal place precision
  function MANTISSA_STAKING() external pure returns(uint);

  /// @notice `collateralFactor` cannot be above 1.0
  function MAX_COLLATERAL_FACTOR() external pure returns(uint);

  /// @notice `marketFactor` cannot be above 1.0
  function MAX_MARKET_FACTOR() external pure returns(uint);

  /// @notice version number of this contract, will be bumped upon contractual change
  function VERSION_NUMBER() external pure returns(string memory);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IVeQoda is IERC20 {

  /** EVENTS **/
  
  /// @notice Emitted when user stakes underlying QODA
  event Stake(address indexed account, uint amount);

  /// @notice Emitted when user unstakes underlying QODA
  event Unstake(address indexed account, uint amount);

  /// @notice Emitted when user claims veToken
  event Claim(address indexed account, uint amount);

  /** USER INTERFACE **/
  
  /// @notice Stake underlying into contract
  /// @param amount Amount of underlying to stake
  function stake(uint256 amount) external;
  
  /// @notice Unstake underlying tokens
  /// NOTE: You will lose ALL your veToken if you unstake ANY amount of underlying tokens
  /// @param amount Amount of underlying tokens to unstake
  function unstake(uint amount) external;

  /// @notice Claims accumulated veToken
  function claimVeToken() external;

  /** VIEW FUNCTIONS **/
  
  /// @notice checks whether user has underlying staked
  /// @param account The user address to check
  /// @return true if the user has underlying in stake, false otherwise
  function hasStaked(address account) external view returns (bool);
  
  /// @notice Calculate the amount of veToken that can be claimed by user
  /// @param account Address to check
  /// @return uint Amount of veToken that can be claimed by user
  function claimableVeToken(address account) external view returns(uint);
  
  /// @notice Returns the underlying amount of underlying staked by the user
  /// @param account User address to check
  /// @return uint Amount of staked underlying underlying
  function getStakedAmount(address account) external view returns(uint);

  function qodaERC20() external view returns(address);

  function stakingEmissionsQontroller() external view returns(address);

  function feeEmissionsQontroller() external view returns(address);

  function veTokenPerBlock() external view returns(uint);

  function maxVeToken() external view returns(uint);
}

//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

library QTypes {

  /// @notice Contains all the details of an Asset. Assets  must be defined
  /// before they can be used as collateral.
  /// @member isEnabled True if an asset is defined, false otherwise
  /// @member isYieldBearing True if token bears interest (eg aToken, cToken, mToken, etc)
  /// @member underlying Address of the underlying token
  /// @member oracleFeed Address of the corresponding chainlink oracle feed
  /// @member collateralFactor 0.0 to 1.0 (scaled to 1e8) for discounting risky assets
  /// @member marketFactor 0.0 1.0 for premium on risky borrows
  /// @member maturities Iterable storage for all enabled maturities
  struct Asset {
    bool isEnabled;
    bool isYieldBearing;
    address underlying;
    address oracleFeed;
    uint collateralFactor;
    uint marketFactor;
    uint[] maturities;
  }

  /// @notice Contains all the fields of a published Quote
  /// @notice quoteId ID of the quote - this is the keccak256 hash of signature
  /// @param marketAddress Address of `FixedRateLoanMarket` contract
  /// @param quoter Account of the Quoter
  /// @param quoteType 0 for PV+APR, 1 for FV+APR
  /// @param side 0 if Quoter is borrowing, 1 if Quoter is lending
  /// @param quoteExpiryTime Timestamp after which the quote is no longer valid
  /// @param APR In decimal form scaled by 1e4 (ex. 10.52% = 1052)
  /// @param cashflow Can be PV or FV depending on `quoteType`
  /// @param nonce For uniqueness of signature
  /// @param signature Signed hash of the Quote message
  struct Quote {
    bytes32 quoteId;
    address marketAddress;
    address quoter;
    uint8 quoteType;
    uint8 side;
    uint64 quoteExpiryTime; //if 0, then quote never expires
    uint64 APR;
    uint cashflow;
    uint nonce;
    bytes signature;
  }
  
  /// @notice Contains all the configurations customizable to an address
  /// @member enabled If config for an address is enabled. When enabled is false, credit limit is infinite even if value is 0
  /// @member minCollateralRatio If collateral ratio falls below `_minCollateralRatio`, it is subject to liquidation. Scaled by 1e8
  /// @member initCollateralRatio When initially taking a loan, collateral ratio must be higher than this. `initCollateralRatio` should always be higher than `minCollateralRatio`. Scaled by 1e8
  /// @member creditLimit Allowed limit in virtual USD for each address to do uncollateralized borrow, scaled by 1e18
  struct CreditFacility {
    bool enabled;
    uint minCollateralRatio;
    uint initCollateralRatio;
    uint creditLimit;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlUpgradeable.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerableUpgradeable is IAccessControlUpgradeable {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControlUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../utils/StringsUpgradeable.sol";
import "../utils/introspection/ERC165Upgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {
    function __AccessControl_init() internal onlyInitializing {
    }

    function __AccessControl_init_unchained() internal onlyInitializing {
    }
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        StringsUpgradeable.toHexString(uint160(account), 20),
                        " is missing role ",
                        StringsUpgradeable.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 *  Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.
 *  See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 *  In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.
 * ====
 */
library EnumerableSetUpgradeable {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControlUpgradeable {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library StringsUpgradeable {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal onlyInitializing {
    }

    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20Upgradeable.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"tokenAddress","type":"address"},{"indexed":false,"internalType":"bool","name":"isYieldBearing","type":"bool"},{"indexed":false,"internalType":"address","name":"oracleFeed","type":"address"},{"indexed":false,"internalType":"uint256","name":"collateralFactor","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"marketFactor","type":"uint256"}],"name":"AddAsset","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"marketAddress","type":"address"},{"indexed":true,"internalType":"address","name":"tokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"maturity","type":"uint256"}],"name":"CreateFixedRateMarket","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetCloseFactor","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"tokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetCollateralFactor","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldMinValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"oldInitValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newMinValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newInitValue","type":"uint256"}],"name":"SetCollateralRatio","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"bool","name":"oldEnabled","type":"bool"},{"indexed":false,"internalType":"uint256","name":"oldMinValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"oldInitValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"oldCreditValue","type":"uint256"},{"indexed":false,"internalType":"bool","name":"newEnabled","type":"bool"},{"indexed":false,"internalType":"uint256","name":"newMinValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newInitValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newCreditValue","type":"uint256"}],"name":"SetCreditFacility","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"feeEmissionsQontrollerAddress","type":"address"}],"name":"SetFeeEmissionsQontroller","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetLiquidationIncentive","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"tokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetMarketFactor","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetMaturityGracePeriod","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"tokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetMinQuoteSize","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetProtocolFee","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"qollateralManagerAddress","type":"address"}],"name":"SetQollateralManager","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldValue","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newValue","type":"uint256"}],"name":"SetRepaymentGracePeriod","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"stakingEmissionsQontrollerAddress","type":"address"}],"name":"SetStakingEmissionsQontroller","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"tradingEmissionsQontrollerAddress","type":"address"}],"name":"SetTradingEmissionsQontroller","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"veQodaAddress","type":"address"}],"name":"SetVeQoda","type":"event"},{"inputs":[],"name":"ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MANTISSA_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MANTISSA_COLLATERAL_RATIO","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MANTISSA_DEFAULT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MANTISSA_FACTORS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MANTISSA_STAKING","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MANTISSA_USD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MARKET_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_COLLATERAL_FACTOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MAX_MARKET_FACTOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"MINTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"UINT_MAX","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"VERSION_NUMBER","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"VETOKEN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"bool","name":"isYieldBearing","type":"bool"},{"internalType":"address","name":"underlying","type":"address"},{"internalType":"address","name":"oracleFeed","type":"address"},{"internalType":"uint256","name":"collateralFactor_","type":"uint256"},{"internalType":"uint256","name":"marketFactor_","type":"uint256"}],"name":"_addAsset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IFixedRateMarket","name":"market","type":"address"},{"internalType":"uint256","name":"protocolFee_","type":"uint256"},{"internalType":"uint256","name":"minQuoteSize_","type":"uint256"}],"name":"_addFixedRateMarket","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"closeFactor_","type":"uint256"}],"name":"_setCloseFactor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"collateralFactor_","type":"uint256"}],"name":"_setCollateralFactor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"minCollateralRatio_","type":"uint256"},{"internalType":"uint256","name":"initCollateralRatio_","type":"uint256"}],"name":"_setCollateralRatio","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account_","type":"address"},{"internalType":"bool","name":"enabled_","type":"bool"},{"internalType":"uint256","name":"minCollateralRatio_","type":"uint256"},{"internalType":"uint256","name":"initCollateralRatio_","type":"uint256"},{"internalType":"uint256","name":"creditLimit_","type":"uint256"}],"name":"_setCreditFacility","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"feeEmissionsQontrollerAddress","type":"address"}],"name":"_setFeeEmissionsQontroller","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"liquidationIncentive_","type":"uint256"}],"name":"_setLiquidationIncentive","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"marketFactor_","type":"uint256"}],"name":"_setMarketFactor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maturityGracePeriod_","type":"uint256"}],"name":"_setMaturityGracePeriod","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IFixedRateMarket","name":"market","type":"address"},{"internalType":"uint256","name":"minQuoteSize_","type":"uint256"}],"name":"_setMinQuoteSize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IFixedRateMarket","name":"market","type":"address"},{"internalType":"uint256","name":"protocolFee_","type":"uint256"}],"name":"_setProtocolFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"qollateralManagerAddress","type":"address"}],"name":"_setQollateralManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"repaymentGracePeriod_","type":"uint256"}],"name":"_setRepaymentGracePeriod","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"stakingEmissionsQontrollerAddress","type":"address"}],"name":"_setStakingEmissionsQontroller","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"thresholdUSD_","type":"uint256"}],"name":"_setThresholdUSD","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tradingEmissionsQontrollerAddress","type":"address"}],"name":"_setTradingEmissionsQontroller","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"veQodaAddress","type":"address"}],"name":"_setVeQoda","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"allAssets","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"assets","outputs":[{"components":[{"internalType":"bool","name":"isEnabled","type":"bool"},{"internalType":"bool","name":"isYieldBearing","type":"bool"},{"internalType":"address","name":"underlying","type":"address"},{"internalType":"address","name":"oracleFeed","type":"address"},{"internalType":"uint256","name":"collateralFactor","type":"uint256"},{"internalType":"uint256","name":"marketFactor","type":"uint256"},{"internalType":"uint256[]","name":"maturities","type":"uint256[]"}],"internalType":"struct QTypes.Asset","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"closeFactor","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"collateralFactor","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account_","type":"address"}],"name":"creditLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"feeEmissionsQontroller","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"maturity","type":"uint256"}],"name":"fixedRateMarkets","outputs":[{"internalType":"contract IFixedRateMarket","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"initCollateralRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"initCollateralRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"admin","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IFixedRateMarket","name":"market","type":"address"}],"name":"isMarketEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"liquidationIncentive","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"marketFactor","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"maturities","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maturityGracePeriod","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"minCollateralRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minCollateralRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IFixedRateMarket","name":"market","type":"address"}],"name":"minQuoteSize","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IFixedRateMarket","name":"market","type":"address"}],"name":"protocolFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"qPriceOracle","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"qollateralManager","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"repaymentGracePeriod","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stakingEmissionsQontroller","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"thresholdUSD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tradingEmissionsQontroller","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"underlyingToMToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"veQoda","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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